IMPORTING CAD FILES

Below are PC Board and mechanical CAD file formats that maybe imported into the Unisoft software. After you have installed the Unisoft software full samples of most of these formats can be found in the directory c:\program files\unisoft . In this directory the sample files start with SAMPLE_ and the CAD System is in the name of the file, for example the file SAMPLE_PADS.ASC is a full sample of the PADS CAD system ASCII file. You can then match the samples to your CAD files for processing with the Unisoft software. CAD file formats change all the time so please check directly with Unisoft for the latest support status on these or other CAD systems not listed.

Also note that the CAD system in addition to exporting its native format may export industry standard formats such
as IPC-D-356, GENCAD, FABMASTER, etc. In most cases these files can be used in place of the native CAD files.

TIP: If you try to open your file with a TEXT editor and the characters are not standard ASCII text characters then it is a binary file and not the ASCII CAD file and Unisoft can not import it!

Unisoft supplies the information below to aid our clients but is not responsible for any problems encountered.

CAD System/Standard File Information Standard extension Contents Sample
Altium Designer
Altium Designer
Altium Designer
AutoCAD
Bartels Auto Engineer
Bartels Auto Engineer
Cadence/Valid Allegro
Cadence/Valid Allegro
CADSTAR
CADSTAR
ComputerVision
Eagle CAD
Eagle CAD
Eagle CAD
Fabmaster
Fabmaster
FastCAD
GENCAD
Gerber
HPGL
Intergragh
IPC-D-356
McCAD
McCAD
MentorBoardStation
MentorBoardStation
Mentor Expedition
Mentor Expedition
OrCAD
OrCAD
PADS
PCAD
Protel
Protel
Seetrax Ranger
SuperMax ECAD
Tango
Theda
Veribest
Veribest
Visula Protel output
X-Y/pins list
data (see note 5)
Design Exchange
IPC-D-356
GENCAD
X-Y/pins list
IPC-D-356
CADIF
X-Y/pins list
X-Y/pins list
IPC-D-356
GENCAD
X-Y/pins list
X-Y/pins list
X-Y/pins list
Gerber(R274D,R274X)
GENCAD
Gerber(R274D,R274X)
Internet
X-Y/pins list
X-Y/pins list
GENRAD
X-Y/pins list
Mentor Neutral-X-Y/pin
Mentor Route (traces)
GENCAD
IPC-D-356
Min file
GENCAD
ASCII output
PDIF
Protel output
Protel output
GENCAD
IPC-D-356 Netlist
X-Y/pins list
TL
X-Y/pins list
GENCAD
CADIF .pro
.pcb
.pcbdoc
.dxf
.ipc/.356/varies
.cad
varies (note 3)
.ipc/.356 (note 3)
.paf
.cdi
.cvi
.ipc/.356 (note 4)
.cad (note 4)
.fatf - FATF file
.fatf - FATF file
varies
varies
.cad
.ger/grb/art/pho/varies
.hpg
.lst
varies
.cad
.tbs
.neu/varies
.txt/varies
.cad
.ipc/.356/varies
.min
.cad
.asc
.pdf
.pro
.ipc/.356/varies
.cad
.ipc/.356/varies
.pcb
.tl
.vrb
.cad
.paf PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data
(see note 5)
drawing file (note 1)
PCB X-Y/pins/netlist data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data (note 3)
PCB X-Y/pins/netlist data (note 3)
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist data (note 4)
PCB X-Y/pins/netlist/trace data (note 4)
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data
PCB drawing file (note 2)
PCB X-Y/pins/netlist/trace data
PCB drawing file (note 2)
drawing file
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist data
PCB trace data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist data
PCB X-Y/pins/netlist data
PCB X-Y/pins/netlist/trace data
PCB X-Y/pins/netlist/trace data y
y
n
y
y
y
y
y
y
y
n
y
y
y
y
y
y
y
y
y
y
y
y
n
y
y
y
y
y
y
y
y
y
y
y
y
y
n
y
y
y

Full samples of most of the CAD formats above can be downloaded by clicking this link
http://www.unisoft-cim.com/download/CAD_SAMPLES.zip . After the download is complete you will find the CAD samples in the file CAD_SAMPLES.ZIP .

BINARY FILES: The Unisoft software imports the ASCII files the ECAD systems export but it does not import their binary files. Binary PCB database files are the ECAD companies own proprietary binary format. These binary file formats are normally not public or documented and my violate copyrights. Also as an ECAD company releases new versions of it's software their binary format may change and it would be virtually impossible to modify the Unisoft software to accommodate these changes in a timely manner. For all these reasons the Unisoft software does not import the binary files directly . The Unisoft software imports the standard ASCII files these ECAD systems export.

Note 1: AutoCAD .dxf files are a "Design eXchange Format" files. This file type is only a drawing file. Unisoft can import and display these drawing files but they have little other value within the Unisoft software.

Note 2: Gerber data is basically a drawing file of the PC Boards pad information. Gerber does not contain component, pin or netlist information. Wherever possible, from the listing above, try to obtain CAD files with X-Y/pins/netlist etc. data. As is the case with virtually all Contract Electronics Manufacturers often the only data their clients provide are the gerber files. In this case the Unisoft ProntoGERBER-CONNECTION software is used. ProntoGERBER-CONNECTION is special software that can take these gerber files and turn them into intelligent component, X-Y pin, data files that the other Unisoft software modules can then use.

Note 3: Importing Allegro CAD files into the Unisoft software - Allegro can be less straight forward then the other CAD systems in generating the necessary ASCII file that is then imported into the Unisoft software. Outlined below are two options to create this ASCII file.

Please note that the main Allegro binary database has a .BRD extension. The .BRD is in Allegro's own proprietary binary format that is not public or documented and Unisoft does not import this file directly. The Unisoft software imports the standard ASCII files this database can export.

Option #1 - Some Allegro systems (NT version for example) will allow you to export out an IPC-D356 ASCII file. IPC-D356 is created directly from the export menu on the Allegro CAD system and the Unisoft software can then import the IPC-D356 file.

To export IPC-D356 from the Allegro software click the EXPORT MENU then click IPC-D356 and the resultant .IPC file created can be imported into the Unisoft software. To import the .IPC file into the Unisoft software first start the Unisoft software and click the main FILE menu then select SMART OPEN and select the directory where the .IPC file is located, then select the .IPC file and click OK. A window will open, click OK and the PCB will be displayed.

Option #2 - Some customers that use ALLEGRO have been able to export the standard file format from ALLEGRO called FABMASTER. We recommend the Fabmaster file format because it contains a large amount of the PC Board detail (traces, etc.).

To export FABMASTER from the Allegro software you need to download and run the skill file script to extract Fabmaster CAD data. The licensed Cadence Allegro user can go to "Sourcelink" on the Cadence website and download the Fabmaster skill file to extract Fabmaster CAD data. The skill file should contain information on how it should be run. The resultant Fabmaster .CAD file created can be imported into the Unisoft software. To import the .CAD file into the Unisoft software first rename the extension of the file from .CAD to .FAB then start the Unisoft software and click the main FILE menu then select OPEN and select the directory where the .FAB file is located. Next click the pull down menu next to "LIST FILE TYPES" and select "FabMaster Files (*.FAB)" then select the .FAB file and click OPEN and the PCB will be displayed.

The first few lines of the Fabmaster file look something like this:

If you have an ASCII file similar in format to the one above "A!XXX!YYY!ZZZ!" but it does not import into the Unisoft software with the above mentioned methods then first change the file extension to .VAL and try to import it into the Unisoft software. If that does not work then change the file extension to .VA2 and try to import it into the Unisoft software. The "A!XXX!YYY!ZZZ!" format above comes in many variations so if you still have issues then please contact Unisoft.

Note 4: Importing EAGLE CAD files into the Unisoft software - EAGLE CAD system users can export GenCAD, IPCD356, etc. files that can then be importing into the Unisoft software. The Eagle CAD system uses "User Language Programs" scripts to export data out. To download the "User Language Programs" scripts for GenCAD, IPCD356, etc. go to the Eagle website at http://www.cadsoftusa.com then click DOWNLOAD then click ULP's - USER LANGUAGE PROGRAMS and select the GenCAD or IPCD356 download. Please follow any instructions provided on the CADSOFT website.

Note 5: Altium Designer .PCBDOC - The preferred format for Altium Designer is the Protel PCB 2.8 ASCII format. To export the Protel PCB 2.8 ASCII format from the SAVE AS menu on the Altium Designer CAD system choose the Protel PCB 2.8 ASCII format. This file will import correctly into the Unisoft software.

The Protel file will have a .PCB file extension and it should have a .PRO extension if you wish to open it with the Unisoft standard OPEN menu. If you use the Unisoft SMART OPEN menu then it does not matter what the extension is, the .PCB extension will import fine.Computer simulation of a PCB production line: metamodeling approach

Berna Dengiz, , a and Kunter S. Akbayb
a Department of Industrial Engineering, Gazi University, 06570 Maltepe, Ankara, Turkey
b Akbay & Associates, 4772 N. Sheffield Avenue, Whitefish Bay, WI 53211, USA
Received 30 September 1997; accepted 3 February 1999. Available online 2 December 1999.

Abstract
This paper presents the results of two simulation models to investigate the effects of push and pull systems on a printed circuit board (PCB) manufacturing process at an electronics company in Ankara, Turkey. The current manufacturing process is a push system where the large batches of work-in-process are routed from one operation to another along a production line with 13 stations. It is shown that with the proposed pull system, the daily productivity can be increased by 12%. Through metamodeling with a regression metamodel analysis, the batch size optimization problem is considered for the proposed pull system of this factory producing PCBs which are used as main parts for many electronic devices such as tachometers, cash registers and printers. The regression metamodel greatly reduced the cost, time, and amount of the effort spent in analyzing the simulation. The model was validated and shown to provide good approximations to simulation results.

Author Keywords: Printed circuit board (PCB) manufacturing; Batch size; Push and pull systems; Simulation; Metamodeling 3 Matching ResultsSell PCBAJan 25, 2008
Product Name: PCBA Place of Origin: China We can design and manufacture PCBA for appliances, toys a...
EnTech Manufacturing (Shenzhen) Limited


China Offline
26 Matching ResultsSell Printed circuit boardJan 25, 2008
We are a factory that specialize in manufacturing PCB. We offer quality -product for our customers...
Dongguan Greatta Electronic Factory


China Offline
5 Matching ResultsSell PCBAJan 25, 2008
Features: 1) Fabrication data inputs: gerber data RS-274-X or RS-274-D with aperture list and...
Yueqing Switchtec Co., Ltd.


China Offline
103 Matching ResultsSell Printed Circuit Board Assembly (PCBA)Jan 25, 2008
Product Name: Printed Circuit Board Assembly (PCBA) Model Number: B18941 Place of Origin: China Key...
Shenzhen Tengmai Electronic Co., Ltd.


China Online
7 Matching ResultsSell 6-Layer FPCJan 25, 2008
Features: 1) 6-layer FPC 2) Base materials: BT, Kapton, G10, FR4, CEM-3 3) Base copper thickness...
Xiamen Guangpu Electronics Co., Ltd.


China Online
14 Matching ResultsSell Double Side PCB BoardJan 25, 2008
PCB factory has obtained ISO 9001 and UL, and we specialize in single, double-sided board ....
US (HK) Industrial Co., Ltd.


Hong Kong Online
14 Matching ResultsSell PCB production and PCB AssemblingJan 25, 2008
onestop service including PCB production,PCB Assembling and SMT,material purchasing,tests,packing and quick delivery service....
Shenzhen IBE Technology Co., Ltd.


China Offline
3 Matching ResultsSell electric control PC BoardJan 25, 2008
good quality ,fast delivery,make pcb ,purchase compoents and process SMT...
Shenzhen Jingbang Technology Co., Ltd.


China Online Sell Display PCBJan 25, 2008
Motor typeInduction/two-speed...
Ningbo Yinzhou Eastdragon Electronic & Technology Co., Ltd.


China Offline
2 Matching ResultsSell PCBJan 25, 2008
Specifications: CEM-1, FR-1, FR-4 Thickness:0.6mm,0.8mm,1.0mm,1.2mm,1.5mm,1.8mm,2.0mm Thickness:of copper:0.5 oz,1 oz,2 oz...
Pujiang Hengda Photoelectric Co., Ltd.


China Offline Sell PCBAJan 22, 2008
Professional manufactory of PCBA...
Dongguan Jinzhong Electronics Co., Ltd.


China Offline
35 Matching ResultsSell Double Sided PCBJan 25, 2008
We have made our process lead free to meet with the RoHS requirement. Lead Free HAL, OSP, Immersion ...
Elecsound Electronics Co., Ltd.


Hong Kong Offline
7 Matching ResultsSell PCB BoardJan 25, 2008
Number of layers: double-side Material: FR--4 Board thickness: 1.6mm Plating process: tin plating...
Changzhou Bentop Tech-Electronic Co., Ltd.


China Offline
7 Matching ResultsSell FR-4 Double-sided PCBJan 25, 2008
Double-sided PCB...
Jiaxing Century Electronics Co., Ltd.


China Offline
14 Matching ResultsSell Single/Double-Sided PCBJan 25, 2008
Features: 1) 0.15mm minimum line foot-ath (interval) 2) Min. aperture: 0.3mm 3) The largest area ...
Zhejiang Tiansn Electronic Co., Ltd.


China Online Sell Control BoardJan 24, 2008
Control board suits to sliding gates....
Fuyang Lushan Machine Factory


China Offline sell camera boardJan 21, 2008
double camera board with OSD...
Shenzhen Wekomp Technology Co., Ltd.


China Offline
47 Matching ResultsSell Gold-Plated Mobile PCB BoardJan 22, 2008
Specifications: 1) 6-layer PCB 2) Min. line space: 0.15mm 3) Min. line width: 0.12mm 4) Min. hol...
Shenzhen Glorysky Electronic Co., Ltd.


China Offline
2 Matching ResultsSell LCD A/D BoardJan 25, 2008
Weproduce LCD/TV monitorcontroller boards, car TV/monitor controller boards....
Ateko Electronics Co., Ltd.


China Online
3 Matching ResultsSell Double-sided PCBJan 25, 2008
1.Product Name: Printed Circuit board 2.Place of Origin: China 3.Certificate: ROHS UL 4. Quality standard: ISO900:2000...
Ningbo Economic Technological Development Zone East-Asia Circuit Board Co., Ltd.


China Offline LCD monitor AD board Jan 25, 2008
19inch panel 2.Automatically identify 4:3 16:9 two models 3.Supprot Plug & Play ...
Guangzhou Jinding Optoelectronics Co., Ltd.


China Offline
68 Matching ResultsSell PCBJan 25, 2008
Double side, Mulit layer and Al board...
Jing Sing Fai Electronic Ltd.


Hong Kong Offline
7 Matching ResultsSell Vacuum Packing Machine Controller BoardJan 25, 2008
Features: 1) Our R&D team can develop new controller board as per customer's request in a short ...
Hangzhou Frankever Electronic Co., Ltd.


China Online
5 Matching ResultsSell Double-Sided PCBJan 25, 2008
Features: 1) Material: FR-4, 1.6mm 2) Solder mask: photo imaginable 3) Profile: routered 4) Min....
Wujiang Dongfeng Electronics Co., Ltd.


China Online
3 Matching ResultsSell JT1004 PCB BoardJan 25, 2008
Features: 1) PCB board 2) Breadless breadboard 3) Test board 4) Copper clad laminated 5) CEPCP...
Changzhou Globaltone Int'l Trade Co., Ltd.


China Offline Sell Printed Circuit BoardJan 25, 2008
Base laminate materials: halogen free Board technology: HASL + gold immersion...
Shanghai Tunrui Industrial & Trade Co., Ltd.


China Offline
3 Matching ResultsSell SMT, MI Hybrid PCB Assembly (PCBA)Jan 25, 2008
SMT and Traditional Assembly Service for PCBA, MI,DIP,Wave Solder,Manual Solder,Function Testing...
Dongguan Onlitex Electronic Co., Ltd.


China Online
3 Matching ResultsSell PCB BOARDJan 25, 2008
Double-side PCB: Layers:2 Finish: Flash Gold Min.Hole:0.3mm Min.Trace Width:7.48mil...
Beijing Jinqiu Guoshi Electronics & Technology Co., Ltd.


China Offline
2 Matching ResultsSell pcbaJan 25, 2008
the PCBA of wheel chair...
Guangzhou Hengyun Electronics Techonlogy Co., Ltd.


China Offline
3 Matching ResultsSell double-layer CCD color boardJan 25, 2008
We supply CCD color board(double layers)...
Shenzhen Nikoan Electronic Technology Co., Ltd.


China Online PCB products, single side FPC, double-side FPC Jan 25, 2008
GPS navigation system, computer, meter and digital products...
Specialist Holdings Ltd.


Hong Kong Online pcbJan 24, 2008
We are capable of reproducing the prototype samples, and provide the PCB file acording to circuit schematic drawing...
Jasper Electronics Co., Ltd.


China Offline
2 Matching ResultsCircuit board Jan 24, 2008
Circuit board ...
Huading Group Co., Ltd.


Hong Kong Online
4 Matching ResultsPCBJan 21, 2008
Double-sided,Immersion Nicle...
Wenzhou Hongliang Trade Co., Ltd.


China Offline
2 Matching ResultsDouble-Sided PCBJan 24, 2008
We welcome sample, prototype, small production. If you are interested in us, contact us, we will quote for you as soon as possible ...
JOSEPH-COMPANY ELECTRONICS CO LTD

Taiwan Online Smt, Pcba, & Design ServicesJan 21, 2008
Avcom has the capability to design and produce your prototypes and products. Avcom is a complete el...
AVCOM SMT INC

United States Online
2 Matching ResultsSell Multilayers PCBJan 24, 2008
Multilayers PCB Single, Double & Multilayers PCBs up to 16 Layers. We Provide High Quality Multi...
GOLD FAME INTERNATIONAL ENTERPRISES CO
Hong Kong Offline
3 Matching ResultsSell High Tg Copper Foil BoardJan 23, 2008
Elecsound is a manufacturer of PCB, specialized in single PCB, double-side PCB, 4 layers PCB to 30 l...
Altium Designer Altium Designer is the world's first and only unified electronic product development system that allows engineers to take a design from concept to completion within a single application. Altium Designer removes the barriers imposed by disparate design flows, unifying the different design disciplines involved in electronics product development by bringing together hardware, and device and vendor independent software and programmable hardware development within a unified environment, allowing all aspects of an electronic product to be designed and managed within a singular system.

Altium Limited P-CAD 2006 P-CAD is the complete design solution for the PCB professional. Whether it's developing high-speed board solutions, integrating large BGA devices into your design flows or dealing with complex signal integrity issues and high density PCB layouts, P-CAD's proven power and stability provides the perfect environment for PCB design.

Ammos Technologies Pvt LTD Freescale Semiconductor Freescale Semiconductor, provides CodeWarrior Development Studio A complete integrated development environment for hardware bring-up through programming applications.

Ammos Technologies Pvt LTD RealView? RealView? Developer Suite is the latest in the well established ARM product family of fully integrated software solutions. RealView Developer Suite contains leading edge tools for creating and debugging, efficient software to run on any processors based on an ARM architecture. In line with our policy of long term customer support, RealView Developer Suite ships with components from previous family members such as ARM Developer SuiteTM (ADS).

Amphenol TCS Backplane System Solutions PCB design, materials, choice of backplane connector and other enabling technologies play a crucial role in determining the success of any system. Amphenol’s experienced applications engineers can assist in the early stages of your backplane assembly design and, along with prototype and quick turn services, speed you to market with the right product the first time. With large format manufacturing capabilities, thru-hole soldering and reliable, repeatable press-fit assembly, no one is better at putting the pieces together than Amphenol TCS.

Amphenol TCS High-Speed, High-Density Connectors Amphenol's broad range of connector product families enable design engineers to achieve their performance targets. Whether the priority is a proven cost-optimized solution or the best performing connector on the market, Amphenol TCS is your source for high-speed and high-density connectors

APLAC Solutions Corporation APLAC RF Design Tool With APLAC Analog Design Tool you can design analog devices, making use of all essential linear and nonlinear analysis methods, as well as optimization and Monte Carlo analysis.You can define the analysis tasks for operating-point calculations, frequency-domain analysis, transient analysis, and harmonic balance simulation. The package contains the APLAC Editor, APLAC Simulator and APLAC Language Interface.

Automotive Integrated Electronics Corporation AIEC9 SoC Development Board (AIEC9DVB) The AIEC9 System on Chip (SoC) Development Board (AIEC9DVB) provides an environment for developing production intent, custom SoCs that are based on the AIEC9 microprocessor (mP) core. Typically, an SoC contains a mP core, associated memory, digital peripherals, and an analog to digital converter. The AIEC9DVB provides provisions for all of these functions such that the SoC can be completely prototyped before committing to silicon.

Axivion GmbH Axivion Bauhaus Suite 5.3 The Axivion Bauhaus Suite provides you with highly valuable information about the structural facts of software. It comprises the following analyses: Architecture Visualization Visualizes the software architecture of your source code "as is". Architecture Checking Compares the "as is" architecture of your source code with the specified architecture. Interface Analysis Shows the interconnectedness of the system and dependencies between components. Metrics Provide you with key figures about different aspects of the source. Clone Detection Detects duplicates within the source, often produced by copy and paste. Dominance Analysis Shows the degree of locality of elements in the source. Cycle Detection Detects cyclic dependencies between elements in the source code. Component Detection Groups logically connected elements of the source. Dead Code Detection Detects parts of the source that are not called or used otherwise (heuristic method).

Cadence Design Systems, Inc. Allegro? AMS Simulator Allegro AMS Simulator is a full-featured simulator for serious analog designers. Sophisticated, internal models allow you to simulate everything from high-frequency systems to low-power IC designs. AMS Simulator draws on the expansive library of models to create off-the-shelf parts or creates models for new devices.

Cadence Design Systems, Inc. Allegro? Design Entry CIS The most widely used schematic solution today. It has powerful component management capabilities and is integrated with Cadence PSpice? for analog design.
Operating Systems: Windows

Cadence Design Systems, Inc. Allegro? Design Entry HDL SI XL Allows electrical engineers to develop and embed optimum constraints during design creation phase. It’s tightly integrated with the proven simulation technology of Allegro Design Entry HDL.
Operating Systems: Windows, Sun, HP, IBM, Linux

Cadence Design Systems, Inc. Allegro? Design Entry HDL XL Cadence? Allegro? Design Entry HDL is a complete, scalable solution for creating printed circuit board (PCB) schematics. This constraint-driven and highly customizable product provides powerful features for team-based design and design reuse. It comes tightly integrated with Allegro Constraint Manager and Allegro PCB Editor, as well as with solutions for digital, analog, and preroute signal integrity (SI) simulations.

Cadence Design Systems, Inc. Allegro? Design Workbench A comprehensive suite of products that combines design tool integration, process control, data management, and library development and management in a single design environment.
Operating Systems: Windows, Sun

Cadence Design Systems, Inc. Allegro? Package Designer L, XL Streamlines IC package design and co-design through a complete constraint-driven physical design solution that supports virtually all packaging methods.
Operating Systems: Windows, Sun, HP, IBM, Linux

Cadence Design Systems, Inc. Allegro? Package SI L Streamlines complex IC package virtual prototyping and interconnect exploration, analysis, and modeling.
Operating Systems: Windows, Sun, HP, IBM, Linux

Cadence Design Systems, Inc. Allegro? PCB Editor Leading physical and electrical constraint-driven PCB layout system that addresses performance and a wide range of design, testability, and manufacturing challenges.
Operating Systems: Windows, Sun, HP, IBM, Linux

Cadence Design Systems, Inc. Allegro? PCB Librarian 610 Advanced library development tool that enables library creation and management by utilizing source-level data standards based on XML.
Operating Systems: Windows, Sun, HP, IBM, Linux

Cadence Design Systems, Inc. Allegro? PCB PI option An option to Cadence? Allegro? PCB SI, power integrity provides a design and analysis environment to develop clear, reliable power delivery systems that work at all frequency ranges of interest.
Operating Systems: Windows, Sun, HP, IBM, Linux

Cadence Design Systems, Inc. Allegro? PCB Router XL The Cadence? Allegro? PCB Router routing environment is the leading solution for automatic and interactive interconnect routing for printed circuit boards (PCBs). Designed to handle routing challenges from simple designs to high-density PCBs requiring complex, high-speed design rules, it uses powerful shape-based algorithms to make the most efficient use of the routing area.

Cadence Design Systems, Inc. Allegro? PCB SI GXL Cadence? Allegro? PCB SI GXL provides a virtual prototyping environment for designs with signals operating in the multi-gigahertz (MGH) frequency range. It offers a completely integrated signal design and analysis solution built on top of the proven Allegro PCB SI environment.

Cadence Design Systems, Inc. Allegro? System Architect GXL Cadence? Allegro? System Architect GXL is the industry’s first multi-style design creation environment. It provides the flexibility and power to create complex system designs using spreadsheets, traditional schematics, or HDL (Verilog?). Compared with conventional schematic capture systems, Allegro System Architect GXL significantly reduces the time to create designs.

CADParts & Consulting PCB Design Services Increase Your Workforce. Not sure how you will get your designs done in this economy? With so many companies cutting back it just makes sense to outsource product design.

CADParts & Consulting PCB Prototypes We have partnered with select fabrication and assembly houses to provide quick turn high quality PCB designs.

Design Solutions, Inc. Hexagon Company Manager Hexagon Company Manager is an efficient corporate-wide information system which integrates all the information and data related to how to manage the development of electronic products for teams distributed globally.

Design Solutions, Inc. Printed Circuit Board Design Design Solutions, Inc. has helped hundreds of people with PCB design requirements ranging from simple prototype to Mil-Spec, JEDEC, & UL/CSA production boards. Internally developed standards are used unless customers have defined design standards. Multiple CAD seats of Cadence, Mentor, PADS, and others ensures compatibility with customer's CAD systems. Designers are available for On-Site work or from one of our local design centers. Through your product development life cycle, we can take care of all your design needs.

DFM MakeDO E MakeDO E is the world's first standalone Batch SyntaxChecker and Editor for SPECCTRA DO Files. MakeDO E is FREE for all Users on current Cadence SPECCTRA Support. MakeDO E is a Windows Product that works with all Windows and UNIX-based DO Files created from any source.

DFM MakeDO E+ MakeDO E+ adds full CAD Data SyntaxChecking to MakeDO E . Check your DO File for Netnames, Pin Numbers, Reference Designators and all CAD Objects like Classes and FromTOs. MakeDO E+ uses your SPECCTRA Design File or OrCAD Capture Schematic File as CAD input.

DFM MakeDO for OrCAD MakeDO for OrCAD is the unique solution for managing your powerful SPECCTRA for OrCAD rules-driven Autorouter. No need to learn DO File Syntax when you have MakeDO to create DO Files right on your desktop. Specially tailored for OrCAD users, Engineers, PCB Designers and Managers, MakeDO for OrCAD reads data and properties from Capture DSN, Layout CCT and SPECCTRA Design files.

DFM SPECCTRA AutoRouting Since we AutoRoute for the most leading edge internet and telecom companies in N. America, we're constantly expanding and evolving our capabilities with SPECCTRA to meet the latest new technology challenges

Douglas Electronics, Inc. DesignWorks Schematic Capture An excellent schematic capture tool for the Macintosh or Windows, DesignWorks does much more than just create a clean schematic drawing of your circuit design. Beneath every wire and every device symbol lies a comprehensive database that is built invisibly and automatically while you just point, click, and draw.

Douglas Electronics, Inc. Douglas CAD/CAM Professional Douglas CAD/CAM is a family of products for the design and manufacture of printed circuit boards. Running on the Apple Macintosh or a Windows pc, the entire line is quick, powerful, and easy to learn. The software, with high resolution graphics and a friendly user interface, provide a high quality engineering workstation that is both very affordable and a pleasure to use.

DownStream Technologies BluePrint-PCB DownStream Technologies, LLC today announced a new configuration and price point of their revolutionary PCB Documentation product BluePrint for PCBs?. Named BluePrint Foundations?, it is built from the same core technology as BluePrint-PCB, allowing users to quickly create comprehensive, electronic PCB fabrication and assembly instructions, but it is more closely aligned in price to appeal to PCB Designers who currently use PADS?, OrCAD? and CADStar? PCB layout products.

DownStream Technologies CAM350 CAM350 is a highly customizable and scalable solution that can be targeted at both the engineering and PCB fabrication communities. CAM350 supports the Microsoft Windows and NT operating systems through either node locked or networked configurations.

DSPECIALISTS Digitale Audio- und Messsysteme GmbH Isolation Amplifier 16 galvanic seperated input channels Output voltage 10 Vpp,